Bien
ACL Race Series Connecting Rod Bushes - Renault 840 730 - STD - 4B7906H-STD
ACL Race Series 4B7906H-STD connecting rod bushes with a trimetal structure are designed for Renault 840 and 730 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B7906H-STD corresponds to the standard size (STD).
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B7906H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: 840 730
- Manufacturers: Renault
- Rod journal diameter (nominal dimension): 43.965 to 43.98 mm
- Connecting rod top end bore: 47.615 to 47.625 mm
- Maximum thickness at the top: 1.806 mm
- Maximum width: 17.75 mm
Engine configurations compatible with ACL 4B7906H-STD bearings
The engine models listed for this set include: 840 730.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,81
-
Width in mm17,75
-
Engine code840 730 - 1.4L 8V
-
Make (Engine)Renault
-
Rod Journal Diameter in mm43,97
43,98 -
Max. connecting rod bore in mm47,63
-
Min. connecting rod bore in mm47,62
Conforme à la commande