ACL Race Series Connecting Rod Bushes - Nissan RB20DE and RB20DET - STD - 6B2630H-STD
ACL Race Series 6B2630H-STD connecting rod bushes with a trimetal construction are designed for Nissan RB20DE and RB20DET engines. They guide the connecting rod top ends over the crankpins and operate using an oil film that separates the moving surfaces. Part number 6B2630H-STD corresponds to the standard size (STD).
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface trim. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2630H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: RB20DE and RB20DET
- Manufacturers: Nissan
- Rod journal diameter (nominal dimension): 44.956 to 44.974 mm
- Connecting rod top end bore: 48 to 48.013 mm
- Maximum thickness at the top: 1.502 mm
- Maximum width: 17 mm
Engine models compatible with ACL 6B2630H-STD bearings
The engine models listed for this set include: RB20DE | RB20DET | VQ20DE | VQ25DE | VQ30DE | VQ30DET.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm17,00
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm44,96
44,97 -
Max. connecting rod bore in mm48,01
-
Min. connecting rod bore in mm48,00