ACL Race Series Connecting Rod Bushes - Volkswagen and Audi EA113 - STD - 4B1609HX-STD

ACL
Reference: ACL-4B1609HX-STD
Supplier Ref.: 4B1609HX-STD

Price: €70.00 Tax included
Supplier stock Shipped between 2026-11-26 and 2026-11-30 from our warehouse
Unavailable in store (Montpellier)
Earn 70 loyalty points
Carbon footprint: 3 kg CO₂

ACL Race Series 4B1609HX-STD connecting rod bushes with a trimetal structure are designed for Volkswagen and Audi EA113 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. The part number 4B1609HX-STD corresponds to the standard size (STD).

The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.


Technical Specifications

  • Type: connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B1609HX-STD
  • Specification: standard specification (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: EA113
  • Manufacturers: Volkswagen | Audi
  • Rod journal diameter (nominal dimension): 47.758 to 47.778 mm
  • Connecting rod top end bore: 50.6 to 50.619 mm
  • Maximum thickness at the top: 1.392 mm
  • Maximum width: 19 mm

Engine models compatible with ACL 4B1609HX-STD bearings

The engine models listed for this set include: EA113.

Mounting Recommendations

Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.

ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.

  • Thickness in mm
    1,39
  • Width in mm
    19,00
  • Engine code
    1.8L 20V T
    EA113 - 2.0L 16V
  • Make (Engine)
    Audi
    Volkswagen
  • Rod Journal Diameter in mm
    47,76
    47,78
  • Max. connecting rod bore in mm
    50,62
  • Min. connecting rod bore in mm
    50,60

16 other products in the same category: