ACL Race Series Connecting Rod Bushes - BMW S14/7 - STD - 4B1489H-STD
ACL Race Series 4B1489H-STD connecting rod bushes with a trimetal structure are designed for BMW S14/7 engines. They guide the connecting rod top ends on the crankshaft journals and operate using the oil film that separates the moving surfaces. Part number 4B1489H-STD corresponds to the standard (STD) size.
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1489H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: S14/7
- Manufacturers: BMW
- Rod journal diameter (nominal dimension): 44.975 to 44.991 mm
- Connecting rod top end bore: 48 to 48.016 mm
- Maximum thickness at the top: 1.493 mm
- Maximum width: 16 mm
Engine models compatible with ACL 4B1489H-STD bearings
The engine models listed for this set include: S14/7.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm16,00
-
Make (Engine)BMW
-
Rod Journal Diameter in mm44,98
44,99 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00