ACL Race Series Connecting Rod Bushes - Toyota 4A, 4AGE, and 4AGZE - 0.50 mm - 4B1780H-.50
The ACL Race Series 4B1780H-.50 trimetal connecting rod bushes are designed for Toyota's 4A, 4AGE, and 4AGZE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B1780H-.50 corresponds to a thickness of 0.50 mm.
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction ply. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
This 0.50 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements, not solely on the level of engine tuning.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1780H-.50
- Thickness: 0.50 mm
- Version: H
- Main engines: 4A, 4AGE, and 4AGZE
- Manufacturers: Toyota
Engine models compatible with ACL 4B1780H-.50 bearings
The engine models listed for this set include: 4A | 4AGE | 4AGZE.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,74
-
Width in mm17,10
-
Engine code4A - 1.6L 16V
4A - 1.6L 20V -
Make (Engine)Toyota
-
Rod Journal Diameter in mm41,49
41,50 -
Max. connecting rod bore in mm45,02
-
Min. connecting rod bore in mm45,00