ACL Race Series Connecting Rod Bushes - Porsche - STD - 6B2473HX-STD

ACL
Reference: ACL-6B2473HX-STD
Supplier Ref.: 6B2473HX-STD

Price: €109.00 Tax included
Available to order Within 20 days on average.
Unavailable in store (Montpellier)
Earn 109 loyalty points
Carbon footprint: 2.34 kg CO₂

The ACL Race Series 6B2473HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Porsche engines compatible with this family of bearings. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 6B2473HX-STD corresponds to the standard size (STD).

Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.


Technical Specifications

  • Type: connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer Part Number: 6B2473HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Manufacturers: Porsche
  • Rod journal diameter (nominal dimension): 54.971 to 54.99 mm
  • Connecting rod top end bore: 58 to 58.019 mm
  • Maximum thickness at the top: 1.486 mm
  • Maximum width: 14.8 mm

Engine Application

Verify that the engine type and crankshaft configuration match the specified part number before mounting.

Mounting Recommendations

Mounting recommendation: Before assembly, verify the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,49
  • Width in mm
    14,80
  • Make (Engine)
    Porsche
  • Rod Journal Diameter in mm
    54,97
    54,99
  • Max. connecting rod bore in mm
    58,02
  • Min. connecting rod bore in mm
    58,00

16 other products in the same category: