ACL Connecting Rod Bushes - 0.020 inches (0.508 mm) - 4B2250-020
ACL 4B2250-020 connecting rod bushes correspond to the manufacturer’s part number specified for the engine in question. Their function is to help guide rotating surfaces and maintain the oil film in the lower engine.
This part number is part of the ACL bearing lineup, but its current designation does not allow it to be definitively identified as belonging to the ACL Race Series without verification. It must be selected based on the dimensions of the crankshaft and the corresponding housings.
The dimension of 0.020 inches (0.508 mm) must be compared to the actual machining tolerance of the crankshaft and the clearance value measured during assembly.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Manufacturer Part Number: 4B2250-020
- Dimension: 0.020 inches (0.508 mm)
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A replacement dimension should only be installed if the corresponding machining has been performed.
-
Thickness in mm2,07
-
Width in mm20,06
-
Rod Journal Diameter in mm47,14
47,15 -
Max. connecting rod bore in mm51,35
-
Min. connecting rod bore in mm51,33