ACL Race Series Connecting Rod Bushes - Volkswagen and Audi KR, G60, and 9A - STD - 4B1606HX-STD
The ACL Race Series 4B1606HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Volkswagen and Audi KR, G60, and 9A engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B1606HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction ply. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1606HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: KR, G60, and 9A
- Manufacturers: Volkswagen | Audi
- Rod journal diameter (nominal dimension): 47.758 to 47.778 mm
- Connecting rod top end bore: 50.6 to 50.619 mm
- Maximum thickness at the top: 1.392 mm
- Maximum width: 19 mm
Engine models compatible with ACL 4B1606HX-STD bearings
The engine models listed for this set include: KR | G60 | 9A | ABF | ABA | EA113 | 3A | 4B | 6A | AAD | AAE | ABB | ABK | ABM | ABT | ACE | ADA | ADP | ADR | ADW.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,39
-
Width in mm19,00
-
Engine code1.8L 8V
1.8L 20V T
9A - 2.0L 16V
ABA - 2.0L 8V
ABF - 2.0L 16V
EA113 - 2.0L 16V
EA855 - 2.5L 20V
EA855 EVO - 2.5L 20V
G60 - 1.8L 8V
KR - 1.8L 16V -
Make (Engine)Audi
Volkswagen -
Rod Journal Diameter in mm47,76
47,78 -
Max. connecting rod bore in mm50,62
-
Min. connecting rod bore in mm50,60