ACL Race Series Connecting Rod Bushes - Honda and Acura F20C and F22C - STD - 4B1912HX-STD

ACL
Reference: ACL-4B1912HX-STD
Supplier Ref.: 4B1912HX-STD

Price: €71.00 Tax included
In stock Shipped tomorrow from our warehouse
Available in store (Montpellier)
Earn 71 loyalty points
Carbon footprint: 3 kg CO₂

The ACL Race Series 4B1912HX-STD connecting rod bushes with a trimetal structure are designed for Honda and Acura F20C and F22C engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 4B1912HX-STD corresponds to the standard (STD) size.

The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design is intended to ensure the mechanical integrity and proper operation of the bearing under severe conditions.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B1912HX-STD
  • Specification: standard specification (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: F20C and F22C
  • Manufacturers: Honda | Acura
  • Rod journal diameter (nominal dimension): 47.98 to 48 mm
  • Connecting rod top end bore: 51.004 to 51.024 mm
  • Maximum thickness at the top: 1.483 mm
  • Maximum width: 19.4 mm

Engine models compatible with ACL 4B1912HX-STD bearings

The engine models listed for this set include: H22 | F20C | F22C | F20C/22C with K24 Crank | H22A | H22Z.

Mounting Recommendations

Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Oiling of the bearing depends on the resulting clearance.

ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,48
  • Width in mm
    19,40
  • Engine code
    F20C - 2.0L 16V
    F20C/22C with K24 Crank - 2.4L 16V
    F22C - 2.2L 16V
    H22 - 2.2L 16V
  • Make (Engine)
    Acura
    Honda
  • Rod Journal Diameter in mm
    47,98
    48,00
  • Max. connecting rod bore in mm
    51,02
  • Min. connecting rod bore in mm
    51,00

16 other products in the same category: