ACL Race Series Connecting Rod Bushes - Porsche - STD - 6B2473H-STD
ACL Race Series 6B2473H-STD connecting rod bushes with a trimetal structure are designed for Porsche engines compatible with this family of bearings. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 6B2473H-STD corresponds to the standard size (STD).
ACL Race Series trimetal technology consists of a steel core and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 6B2473H-STD
- Dimension: standard dimension (STD)
- Version: H
- Manufacturers: Porsche
- Rod journal diameter (nominal dimension): 54.971 to 54.99 mm
- Connecting rod top end bore: 58 to 58.019 mm
- Maximum thickness at the top: 1.499 mm
- Maximum width: 14.8 mm
Engine Application
Verify that the engine type and crankshaft configuration match the specified part number before mounting.
Mounting Recommendations
Mounting recommendation: Inspect the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical strength and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm14,80
-
Make (Engine)Porsche
-
Rod Journal Diameter in mm54,97
54,99 -
Max. connecting rod bore in mm58,02
-
Min. connecting rod bore in mm58,00