ACL Race Series Connecting Rod Bushes - Toyota 1JZGE, 1JZGTE, and 2JZGE - STD - 6B8100H-STD
The ACL Race Series 6B8100H-STD trimetal connecting rod bushes are designed for Toyota 1JZGE, 1JZGTE, and 2JZGE engines. These bush halves help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 6B8100H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series half-bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design is intended to ensure the mechanical integrity and proper operation of the bearing under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 6B8100H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: 1JZGE, 1JZGTE, and 2JZGE
- Manufacturers: Toyota
- Rod journal diameter (nominal dimension): 51.981 to 52 mm
- Connecting rod top end bore: 55.024 to 55.042 mm
- Maximum thickness at the top: 1.506 mm
- Maximum width: 19.3 mm
Engine models compatible with ACL 6B8100H-STD bearings
The engine models listed for this set include: 1JZ | 2JZ | 1JZGE | 1JZGTE | 2JZGE | 2JZGTE.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Oiling of the bearing depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and performance tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,5
-
Width in mm19,30
-
Engine code1JZ - 2.5L 24V
2JZ - 3.0L 24V -
Make (Engine)Toyota
-
Rod Journal Diameter in mm51,98
52,00 -
Max. connecting rod bore in mm55,04
-
Min. connecting rod bore in mm55,02