ACL Race Series Connecting Rod Bushes - Volkswagen and Audi KR, G60, and 9A - 0.25 mm - 4B1606H-.25
The ACL Race Series 4B1606H-.25 trimetal connecting rod bushes are designed for Volkswagen and Audi KR, G60, and 9A engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B1606H-.25 corresponds to a thickness of 0.25 mm.
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats deform during operation.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankpins. The selection should be based on crankshaft measurements, not solely on the engine’s tuning level.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1606H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: KR, G60, and 9A
- Manufacturers: Volkswagen | Audi
Engine types compatible with ACL 4B1606H-.25 bearings
The engine types listed for this set include: KR | G60 | 9A | ABF | ABA | EA113 | 3A | 4B | 6A | AAD | AAE | ABB | ABK | ABM | ABT | ACE | ADA | ADP | ADR | ADW.
Mounting Recommendations
Mounting Recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,53
-
Width in mm19,00
-
Engine code1.8L 8V
1.8L 20V T
9A - 2.0L 16V
ABA - 2.0L 8V
ABF - 2.0L 16V
EA113 - 2.0L 16V
EA855 - 2.5L 20V
EA855 EVO - 2.5L 20V
G60 - 1.8L 8V
KR - 1.8L 16V -
Make (Engine)Audi
Volkswagen -
Rod Journal Diameter in mm47,51
47,53 -
Max. connecting rod bore in mm50,62
-
Min. connecting rod bore in mm50,60