ACL Race Series Connecting Rod Bushes - Toyota 1GR-FE and 1GR - STD - 6B8262H-STD
ACL Race Series 6B8262H-STD connecting rod bushes with a trimetal construction are designed for Toyota 1GR-FE and 1GR engines. They guide the connecting rod top ends over the crankpins and operate using an oil film that separates the moving surfaces. Part number 6B8262H-STD corresponds to the standard (STD) size.
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B8262H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: 1GR-FE and 1GR
- Manufacturers: Toyota
- Rod journal diameter (nominal dimension): 55.992 to 56 mm
- Connecting rod top end bore: 59 to 59.024 mm
- Maximum thickness at the top: 1.492 mm
- Maximum width: 16 mm
Engine models compatible with ACL 6B8262H-STD bearings
The engine models listed for this set include: 1GR-FE | 1GR.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm16,00
-
Make (Engine)Toyota
-
Rod Journal Diameter in mm55,99
56,00 -
Max. connecting rod bore in mm59,02
-
Min. connecting rod bore in mm59,00