ACL Race Series Connecting Rod Bushes - Subaru EZ30D - 0.025 mm - 6B8275H-.025
ACL Race Series 6B8275H-.025 connecting rod bushes with a trimetal construction are designed for Subaru EZ30D engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 6B8275H-.025 corresponds to a thickness of 0.025 mm.
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
This 0.025 mm variant allows you to select bearings that match the actual condition of the crankpins. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B8275H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: EZ30D
- Manufacturers: Subaru
Engine models compatible with ACL 6B8275H-.025 bearings
The engine types listed for this set include: EZ30D.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,5
-
Width in mm15,45
-
Make (Engine)Subaru
-
Rod Journal Diameter in mm51,96
51,98 -
Max. connecting rod bore in mm55,02
-
Min. connecting rod bore in mm55,00