ACL Race Series Connecting Rod Bushes - Nissan SR20DET - STD - 4B2976HX-STD
The ACL Race Series 4B2976HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Nissan SR20DET engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 4B2976HX-STD corresponds to the standard size (STD).
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction ply, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining optimal conditions for oil film formation.
The suffix HX identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B2976HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: SR20DET
- Manufacturers: Nissan
- Rod journal diameter (nominal dimension): 47.956 to 47.974 mm
- Connecting rod top end bore: 51 to 51.013 mm
- Maximum thickness at the top: 1.49 mm
- Maximum width: 19.1 mm
Engine models compatible with ACL 4B2976HX-STD bearings
The engine models listed for this set include: SR20DET.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and performance tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm19,10
-
Engine codeSR20DET - 2.0L 16V
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm47,96
47,97 -
Max. connecting rod bore in mm51,01
-
Min. connecting rod bore in mm51,00