ACL Race Series Connecting Rod Bushes - Nissan TD25 and TD27 - 0.025 mm - 4B2966H-.025
The ACL Race Series 4B2966H-.025 trimetal connecting rod bushes are designed for Nissan TD25 and TD27 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 4B2966H-.025 corresponds to a thickness of 0.025 mm.
The trimetal structure of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. It is designed to ensure the mechanical integrity and proper operation of the bearing under severe conditions.
This 0.025 mm size option allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B2966H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: TD25 and TD27
- Manufacturers: Nissan
Engine models compatible with ACL 4B2966H-.025 bearings
The engine models listed for this set include: TD25 | TD27.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Oiling of the bearing depends on the resulting clearance. A repair size should only be mounted if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,52
-
Width in mm26,10
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm56,89
56,90 -
Max. connecting rod bore in mm60,00
-
Min. connecting rod bore in mm59,99