ACL Race Series Connecting Rod Bushes - Nissan RB20DE and RB20DET - STD - 6B2630HX-STD
The ACL Race Series 6B2630HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Nissan’s RB20DE and RB20DET engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 6B2630HX-STD corresponds to the standard size (STD).
The trimetal design combines a high-resistance steel back, a copper-lead-tin anti-friction ply, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2630HX-STD
- Specification: standard specification (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: RB20DE and RB20DET
- Manufacturers: Nissan
- Rod journal diameter (nominal dimension): 44.958 to 44.974 mm
- Connecting rod top end bore: 48 to 48.013 mm
- Maximum thickness at the top: 1.489 mm
- Maximum width: 17 mm
Engine models compatible with ACL 6B2630HX-STD bearings
The engine models listed for this set include: RB20DE | RB20DET | VQ20DE | VQ25DE | VQ30DE | VQ30DET.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm17,00
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm44,96
44,97 -
Max. connecting rod bore in mm48,01
-
Min. connecting rod bore in mm48,00