ACL Race Series Connecting Rod Bushes - Mitsubishi 4G93, 4G91, and 4G92 - STD - 4B8036H-STD
ACL Race Series 4B8036H-STD connecting rod bushes with a trimetal construction are designed for Mitsubishi 4G93, 4G91, and 4G92 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B8036H-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal main bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction ply. Their radial runout helps maintain the oil film when the bearing housings undergo deformation during operation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B8036H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: 4G93, 4G91, and 4G92
- Manufacturers: Mitsubishi
- Rod journal diameter (nominal dimension): 44.98 to 45 mm
- Connecting rod top end bore: 48 to 48.015 mm
- Maximum thickness at the top: 1.492 mm
- Maximum width: 16.8 mm
Engine models compatible with ACL 4B8036H-STD bearings
The engine models listed for this set include: 4G93 | 4G94 | 4G91 | 4G92 | 4G93-T.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and control of operating clearances.
-
Thickness in mm1,49
-
Width in mm16,80
-
Engine code4G93 - 1.8L 16V
4G94 - 2.0L 16V -
Make (Engine)Mitsubishi
-
Rod Journal Diameter in mm44,98
45,00 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00