ACL Race Series Connecting Rod Bushes - Nissan VQ35DE - STD - 6B2640H-STD
ACL Race Series 6B2640H-STD connecting rod bushes with a trimetal structure are designed for Nissan VQ35DE engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. The part number 6B2640H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish composed of a lead-tin-copper alloy, with a nickel barrier layer in between. This design is intended to ensure mechanical durability and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, the bearings must be measured once installed and the caps tightened to the prescribed torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 6B2640H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: VQ35DE
- Manufacturers: Nissan
- Rod journal diameter (nominal dimension): 51.956 to 51.975 mm
- Connecting rod top end bore: 55 to 55.013 mm
- Maximum thickness at the top: 1.502 mm
- Maximum width: 17 mm
Engine models compatible with ACL 6B2640H-STD bearings
The engine models listed for this set include: VQ35DE.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Cankshaft bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm17,00
-
Engine codeVQ35DE - 3.5L 24V
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm51,96
51,98 -
Max. connecting rod bore in mm55,01
-
Min. connecting rod bore in mm55,00