ACL Race Series Connecting Rod Bushes - Ford - 0.020 inches (0.508 mm) - 4B603H-020
ACL Race Series 4B603H-020 connecting rod bushes with a trimetal construction are designed for Ford engines compatible with this family of bearings. They guide the connecting rod top ends over the crankshaft journals and operate using an oil film that separates the moving surfaces. Part number 4B603H-020 corresponds to a dimension of 0.020 inches (0.508 mm).
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
This 0.020-inch (0.508 mm) size allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B603H-020
- Thickness: 0.020 inches (0.508 mm)
- Version: H
- Manufacturers: Ford
Engine Application
Verify that the engine type and crankshaft configuration match the specified part number before mounting.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications. A replacement size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm2,08
-
Width in mm22,35
-
Make (Engine)Ford
-
Rod Journal Diameter in mm48,69
48,70 -
Max. connecting rod bore in mm52,91
-
Min. connecting rod bore in mm52,90