ACL Race Series Connecting Rod Bushes - Toyota 1UZFE, 2UZFE, and 3UZFE - STD - 8B8091H-STD
ACL Race Series 8B8091H-STD connecting rod bushes with a trimetal construction are designed for Toyota 1UZFE, 2UZFE, and 3UZFE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 8B8091H-STD corresponds to the standard (STD) size.
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 8B8091H-STD
- Specification: standard specification (STD)
- Version: H
- Main engines: 1UZFE, 2UZFE, and 3UZFE
- Manufacturers: Toyota
- Rod journal diameter (nominal dimension): 51.981 to 51.999 mm
- Connecting rod top end bore: 55.001 to 55.024 mm
- Maximum thickness at the top: 1.496 mm
- Maximum width: 19.5 mm
Engine models compatible with ACL 8B8091H-STD bearings
The engine models listed for this set include: 1UZFE | 2UZFE | 3UZFE.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm19,50
-
Make (Engine)Toyota
-
Rod Journal Diameter in mm51,98
52,00 -
Max. connecting rod bore in mm55,02
-
Min. connecting rod bore in mm55,00