ACL Race Series Connecting Rod Bushes - Porsche 930 - 0.25 mm - 6B2462H-.25
ACL Race Series 6B2462H-.25 trimetal connecting rod bushes are designed for Porsche 930 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 6B2462H-.25 corresponds to a thickness of 0.25 mm.
The trimetal structure of the ACL Race Series bearings consists of a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with an interposed nickel barrier. It is designed to ensure the mechanical integrity and proper operation of the bearing under severe conditions.
This 0.25 mm size option allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2462H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: 930
- Manufacturers: Porsche
Engine configurations compatible with ACL 6B2462H-.25 bearings
The engine models listed for this set include: 930 | 930 Turbo.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Bearing oiling depends on the resulting clearance. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and control of operating clearances.
-
Thickness in mm1,62
-
Width in mm17,80
-
Engine code930 - 3.0L 12V
930 - 3.2L 12V
930 Turbo - 3.0L 12V -
Make (Engine)Porsche
-
Rod Journal Diameter in mm52,72
52,74 -
Max. connecting rod bore in mm56,02
-
Min. connecting rod bore in mm56,00