ACL Race Series Connecting Rod Bushes - Nissan VK45, VK50, and VK56 - 0.025 mm - 8B2990H-.025
ACL Race Series 8B2990H-.025 connecting rod bushes with a trimetal construction are designed for Nissan VK45, VK50, and VK56 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 8B2990H-.025 corresponds to a thickness of 0.025 mm.
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.025 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 8B2990H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: VK45, VK50, and VK56
- Manufacturers: Nissan
Engine types compatible with ACL 8B2990H-.025 bearings
The engine models listed for this set include: VK45 | VK50 | VK56.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,52
-
Width in mm18,30
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm53,94
53,95 -
Max. connecting rod bore in mm57,01
-
Min. connecting rod bore in mm57,00