ACL Race Series Connecting Rod Bushes - MINI 4-CYL - STD - 4B2206H-STD
The ACL Race Series 4B2206H-STD connecting rod bushes, featuring a trimetal construction, are designed for MINI 4-cylinder engines. They guide the connecting rod top ends over the crankshaft journals and operate using an oil film that separates the moving surfaces. The part number 4B2206H-STD corresponds to the standard size (STD).
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface trim. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the prescribed torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B2206H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: 4CYL
- Manufacturers: MINI
- Rod journal diameter (nominal dimension): 44.46 to 44.473 mm
- Connecting rod top end bore: 48.146 to 48.158 mm
- Maximum thickness at the top: 1.822 mm
- Maximum width: 21.59 mm
Engine configurations compatible with ACL 4B2206H-STD bearings
The engine types listed for this set include: 4CYL.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and performance tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,82
-
Width in mm21,59
-
Make (Engine)Mini
-
Rod Journal Diameter in mm44,46
44,47 -
Max. connecting rod bore in mm48,16
-
Min. connecting rod bore in mm48,15