ACL Race Series Connecting Rod Bushes - Volkswagen and Audi VR6 - 0.25 mm - 6B5530H-.25
ACL Race Series 6B5530H-.25 trimetal connecting rod bushes are designed for Volkswagen and Audi VR6 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 6B5530H-.25 corresponds to a thickness of 0.25 mm.
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B5530H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: VR6
- Manufacturers: Volkswagen | Audi
Engine types compatible with ACL 6B5530H-.25 bearings
This part number applies specifically to the following engine types within the described family: VR6 | R32 | R36 | VR5 | AAA | ABV | AES | AMV | AQP | AUE | AXJ | AXZ | AYL | AYT | AZZ | BAA | BDB | BDE | BDL | BFH. The list of engine codes and applications must be cross-referenced with the exact mounting configuration before ordering.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A replacement bearing should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,53
-
Width in mm17,00
-
Engine codeR32 - 3.2L 24V
R36 - 3.6L 24V
VR5 - 2.3L 10V
VR5 - 2.3L 20V
VR6 - 2.8/2.9L 12V
VR6 - 2.8L 24V -
Make (Engine)Audi
Volkswagen -
Rod Journal Diameter in mm53,71
53,73 -
Max. connecting rod bore in mm56,82
-
Min. connecting rod bore in mm56,80