ACL Race Series Connecting Rod Bushes - MINI 4-CYL - 0.001 inch (0.025 mm) - 4B2201H-001
ACL Race Series 4B2201H-001 connecting rod bushes with a trimetal structure are designed for MINI 4-cylinder engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B2201H-001 corresponds to a dimension of 0.001 inch (?0.025 mm).
ACL Race Series trimetal technology consists of a steel core and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.001-inch (0.025 mm) version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B2201H-001
- Thickness: 0.001 inch (0.025 mm)
- Version: H
- Main engines: 4CYL
- Manufacturers: MINI
Engine configurations compatible with ACL 4B2201H-001 bearings
The engine types listed for this set include: 4CYL.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,84
-
Width in mm22,35
-
Make (Engine)Mini
-
Rod Journal Diameter in mm41,26
41,27 -
Max. connecting rod bore in mm44,98
-
Min. connecting rod bore in mm44,97