ACL Race Series Connecting Rod Bushes - Porsche - 0.25 mm - 6B2433H-.25
The ACL Race Series 6B2433H-.25 connecting rod bushes with a trimetal structure are designed for Porsche engines compatible with this family of bearings. These half-bearings help guide the connecting rod top end and form the oil film essential for the bearing’s operation. Part number 6B2433H-.25 corresponds to a thickness of 0.25 mm.
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.
This 0.25 mm size option allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2433H-.25
- Thickness: 0.25 mm
- Version: H
- Manufacturers: Porsche
Engine Application
Verify that the engine type and crankshaft configuration match the specified part number before mounting.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm2,12
-
Width in mm16,70
-
Make (Engine)Porsche
-
Rod Journal Diameter in mm52,72
52,74 -
Max. connecting rod bore in mm57,02
-
Min. connecting rod bore in mm57,00