ACL Race Series Connecting Rod Bushes - Renault F7R and F4R - STD - 4B7820HX-STD
The ACL Race Series 4B7820HX-STD connecting rod bushes with a trimetal structure are designed for Renault F7R and F4R engines. These half-bearings help guide the connecting rod top end and form the oil film essential for the bearing’s operation. The part number 4B7820HX-STD corresponds to the standard size (STD).
The trimetal structure of the ACL Race Series bearings features a steel base with high resistance, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B7820HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: F7R and F4R
- Manufacturers: Renault
- Rod journal diameter (nominal dimension): 48 to 48.02 mm
- Connecting rod top end bore: 51.587 to 51.6 mm
- Maximum thickness at the top: 1.755 mm
- Maximum width: 20.5 mm
Engine models compatible with ACL 4B7820HX-STD bearings
The engine models listed for this set include: F1N | F2N | F2R | F3N | F3P | F3R | F7P | F7R | F8M | F8Q | F4R.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Cankshaft bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,76
-
Width in mm20,5
-
Make (Engine)Renault
-
Rod Journal Diameter in mm48,00
48,02 -
Max. connecting rod bore in mm51,60
-
Min. connecting rod bore in mm51,59