ACL Race Series Connecting Rod Bushes - BMW M52B20, M20B20, and M50B20 - STD - 6B1490H-STD
The ACL Race Series 6B1490H-STD connecting rod bushes with a trimetal structure are designed for BMW M52B20, M20B20, and M50B20 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for the bearing’s operation. The part number 6B1490H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B1490H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: M52B20, M20B20, and M50B20
- Manufacturers: BMW
- Rod journal diameter (nominal dimension): 44.975 to 44.991 mm
- Connecting rod top end bore: 48 to 48.016 mm
- Maximum thickness at the top: 1.49 mm
- Maximum width: 18 mm
Engine models compatible with ACL 6B1490H-STD bearings
The engine models listed for this set include: M52B20 | M20B25 | M50B25TU | M52B25 | M52B28 | M54B30 | S50B30US | S52B32US | M20B20 | M20B27 | M50B20 | M50B25 | M50B27 | M54B22 | M54B25.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm1,49
-
Width in mm18,00
-
Engine codeM20B25 - 2.5L 12V
M50B25TU - 2.5L 24V
M52B20 - 2.0L 24V
M52B25 - 2.5L 24V
M52B28 - 2.8L 24V
M54B30 - 3.0L 24V
S50B30US - 3.0L 24V
S52B32US - 3.2L 24V -
Make (Engine)BMW
-
Rod Journal Diameter in mm44,98
44,99 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00