ACL Race Series Connecting Rod Bushes - BMW S65B40 - 0.25 mm - 8B1580H-0.25
ACL Race Series 8B1580H-0.25 connecting rod bushes with a trimetal structure are designed for BMW S65B40 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine assembly. Part number 8B1580H-0.25 corresponds to a thickness of 0.25 mm.
ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankpins. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 8B1580H-0.25
- Thickness: 0.25 mm
- Version: H
- Main engines: S65B40
- Manufacturers: BMW
Engine models compatible with ACL 8B1580H-0.25 bearings
The engine models listed for this set include: S65B40.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm2,12
-
Width in mm15,90
-
Engine codeS65B40 - 4.0L 32V
-
Make (Engine)BMW
-
Rod Journal Diameter in mm51,73
51,74 -
Max. connecting rod bore in mm56,01
-
Min. connecting rod bore in mm56,00