ACL Race Series Connecting Rod Bushes - Hyundai and Kia G6DA - STD - 6B8598H-STD
ACL Race Series 6B8598H-STD connecting rod bushes with a trimetal structure are designed for Hyundai and Kia G6DA engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. The part number 6B8598H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-strength steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier in between. This design ensures mechanical strength and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 6B8598H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: G6DA
- Manufacturers: Hyundai | Kia
- Rod journal diameter (nominal dimension): 54.954 to 54.972 mm
- Connecting rod top end bore: 58 to 58.018 mm
- Maximum thickness at the top: 1.502 mm
- Maximum width: 18 mm
Engine models compatible with ACL 6B8598H-STD bearings
The engine models listed for this set include: G6DA | G6DB | G6DC | G6DH.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm18,00
-
Engine codeG6DA - 3.8L 24V
-
Make (Engine)Hyundai
Kia -
Rod Journal Diameter in mm54,95
54,97 -
Max. connecting rod bore in mm58,02
-
Min. connecting rod bore in mm58,00