ACL Race Series Connecting Rod Bushes - Porsche 911 and 930 - STD - 6B2455HX-STD
ACL Race Series 6B2455HX-STD connecting rod bushes with a trimetal construction are designed for Porsche 911 and 930 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 6B2455HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats experience deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2455HX-STD
- Specification: standard specification (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: 911 and 930
- Manufacturers: Porsche
- Rod journal diameter (nominal dimension): 51.971 to 51.99 mm
- Connecting rod top end bore: 56 to 56.019 mm
- Maximum thickness at the top: 1.977 mm
- Maximum width: 19.8 mm
Engine models compatible with ACL 6B2455HX-STD bearings
The engine models listed for this set include: 911 | 930 | 930 turbo | 930.02 | 930.12 | 930.50 | 930.51 | 930.52.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm1,98
-
Width in mm19,80
-
Engine code911 - 2.4L 12V
911 - 2.7L 12V
930 - 3.0L 12V
930 Turbo - 3.0L 12V -
Make (Engine)Porsche
-
Rod Journal Diameter in mm51,97
51,99 -
Max. connecting rod bore in mm56,02
-
Min. connecting rod bore in mm56,00