EVANS Coolant Oil Change Preparation 2L

EVANS hygroscopic preparatory liquid.

This liquid is made to clean all the cooling system to remove all the water present in the systems.
It can be use several times.
This Evans liquid prepares the cooling system to add the waterless coolant.

Capacity: 2L

Less detail

This HAWK (formerly EVANS) waterless coolant is the fruit of many decades of research and development.

The engineers had specially designed this coolant to maintain the engines at the right temperature in the hardest weather conditions (freezing point below -40°C).

The life-long coolant :

As well as improving your cooling system, the HAWK coolant allows to improve your engine lifespan. This protection will be effective all the life-long of your engine without be changed!!

Waterless - No overheating

The HAWK coolant boiling point is above 180°C.

Waterless - No corrosion

Because it's waterless, the HAWK coolant prevents and eliminates corrosion.

Waterless - Low pressure

The HAWK coolant allows to reduce the pressure in the cooling system.

Waterless - No limescale

By preventing limescale accumulation, the HAWK coolant avoids the transfer of inefficient heat.

USE:

It's important to read carefully the instructions below for the HAWK coolant proper functionning:

1/ Remove the actual coolant present in your cooling system including the one in your heat unity.

2/ Fill the system with the HAWK hygroscopic preparation liquid (Ref: EV-PREP-FLUID). This liquid allows to aliminate all pieces of dirt, limescale debris and other residues that may affect the proper functionning of the HAWK coolant.

3/ Start the engine to its normal functionning temperature and then, allow to cool. Drain again the cooling system.

4/ Fill the cooling system with the HAWK waterless coolant. Run the engine to its normal functionning temperature to expel all the air present in the system.

5/ After the first use, you have to check the coolant liquid level and complete if necessary.

Capacity: 2L

Less detail

EVANS hygroscopic preparatory liquid.

This liquid is made to clean all the cooling system to remove all the water present in the systems.
It can be use several times.
This Evans liquid prepares the cooling system to add the waterless coolant.

Capacity: 2L

Less detail

This waterless coolant from HAWK Power Sport (formerly Evans) is the result of decades of research and development.

Engineers have specially designed this coolant to keep engines at the right temperature in the harshest conditions (freezing point at -40°C).

The unique feature of Powersport R is the addition of an additive that protects engines with magnesium parts!

* Coolant that lasts a lifetime:

In addition to improving your cooling system, HAWK WATERLESS COOLANT extends the life of your engine. This protection will remain active for the entire life of the engine without needing to be replaced!

Waterless - No overheating:

The boiling point of HAWK coolant is above 180°C.

Waterless - No corrosion

Waterless, HAWK coolant prevents and eliminates corrosion.

Waterless - No pressure

HAWK coolant reduces pressure in the cooling system.

No water - No scale:

By preventing the accumulation of hard scale, HAWK coolant prevents inefficient heat transfer.

No water - More power:

Premature detonations associated with overheating are eliminated with this waterless coolant.

USE:

To ensure the performance of HAWK coolant, it is important to follow the instructions below:

1/ Remove the coolant from your cooling system, including the heating unit.

2/ Fill the system with HAWK hygroscopic preparation fluid (Ref: EV-PREP-FLUID). This fluid removes all dirt, scale debris, and other residues that could affect the performance of HAWK coolant.

3/ Start the engine until it reaches its normal operating temperature, then let it cool down. Drain the cooling system again.

4/ Fill the cooling system with HAWK coolant without water. Run the engine until it reaches normal operating temperature to expel air from the system.

5/ After first use, check the coolant level and top up if necessary.

Capacity: 2L

How to bleed your cooling system? Find out here with our tutorial: VIDEO

Less detail

EVANS hygroscopic preparatory liquid.

This liquid is made to clean all the cooling system to remove all the water present in the systems.
It can be use several times.
This Evans liquid prepares the cooling system to add the waterless coolant.

Capacity: 2L

Less detail

EVANS Vintage Cool Waterless Coolant for Pre-war Vehicles 2 Liters

Less detail