ACL Race Series Connecting Rod Bushes - BMW S14/7 - STD - 4B1489HX-STD

ACL
Reference: ACL-4B1489HX-STD
Supplier Ref.: 4B1489HX-STD

Price: €120.00 Tax included
In stock Shipped tomorrow from our warehouse
Available in store (Montpellier)
Earn 120 loyalty points
Carbon footprint: 3 kg CO₂

ACL Race Series 4B1489HX-STD connecting rod bushes with a trimetal construction are designed for BMW S14/7 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B1489HX-STD corresponds to the standard size (STD).

ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B1489HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: S14/7
  • Manufacturers: BMW
  • Rod journal diameter (nominal dimension): 44.975 to 44.991 mm
  • Connecting rod top end bore: 48 to 48.016 mm
  • Maximum thickness at the top: 1.48 mm
  • Maximum width: 16 mm

Engine models compatible with ACL 4B1489HX-STD bearings

The engine models listed for this set include: S14/7.

Mounting Recommendations

Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.

ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,48
  • Width in mm
    16,00
  • Make (Engine)
    BMW
  • Rod Journal Diameter in mm
    44,98
    44,99
  • Max. connecting rod bore in mm
    48,02
  • Min. connecting rod bore in mm
    48,00

16 other products in the same category: