ACL Race Series Connecting Rod Bushes - Opel and General Motors C20LET, C20XE, and Z20LET - 0.25 mm - 4B2322H-.25

ACL
Reference: ACL-4B2322H-025
Supplier Ref.: 4B2322H-.25

Price: €57.83 Tax included
Supplier stock Shipped between 2026-11-26 and 2026-11-30 from our warehouse
Unavailable in store (Montpellier)
Earn 57 loyalty points
Carbon footprint: 3 kg CO₂

The ACL Race Series 4B2322H-.25 trimetal connecting rod bushes are designed for Opel, General Motors, and Holden C20LET, C20XE, and Z20LET engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B2322H-.25 corresponds to a thickness of 0.25 mm.

Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.

This 0.25 mm version allows you to select bearings that match the actual condition of the crankpins. The selection should be based on crankshaft measurements and not solely on the engine’s tuning level.


Technical Specifications

  • Type: connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B2322H-.25
  • Thickness: 0.25 mm
  • Version: H
  • Main engines: C20LET, C20XE, and Z20LET
  • Manufacturers: Opel | General Motors | Holden

Engine configurations compatible with ACL 4B2322H-.25 bearings

This part number applies specifically to the following engine models in the described family: C20LET | C20XE | Z20LET | 16N | 16SH | 16D | 16DA | 18E | 18N | 18NV | 18S | 18SE | 18SEH | 18SV | C18NE | C18NT | C18NV | C18NZ | C18XE | C18XEL. The list of engine codes and applications must be verified against the exact mounting before ordering.

Mounting Recommendations

Mounting Recommendation: Before assembly, verify the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A replacement bearing should only be installed if the corresponding machining has been performed.

ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.

  • Thickness in mm
    1,62
  • Width in mm
    19,30
  • Engine code
    C20LET - 2.0L 16V
    C20XE - 2.0L 16V
    Z20LET - 2.0L 16V
  • Make (Engine)
    General Motors
    Holden
    Opel
  • Rod Journal Diameter in mm
    48,72
    48,74
  • Max. connecting rod bore in mm
    52,01
  • Min. connecting rod bore in mm
    52,00

16 other products in the same category: