ACL Race Series Connecting Rod Bushes - Nissan SR20DE - 0.25 mm - 4B2960H-.25
ACL Race Series 4B2960H-.25 connecting rod bushes with a trimetal construction are designed for Nissan SR20DE engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 4B2960H-.25 corresponds to a thickness of 0.25 mm.
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B2960H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: SR20DE
- Manufacturers: Nissan
Engine configurations compatible with ACL 4B2960H-.25 bearings
The engine models listed for this set include: SR20DE | SR20DET.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,63
-
Width in mm17,10
-
Engine codeSR20DE - 2.0L 16V
SR20DET - 2.0L 16V -
Make (Engine)Nissan
-
Rod Journal Diameter in mm47,71
47,72 -
Max. connecting rod bore in mm51,01
-
Min. connecting rod bore in mm51,00