ACL Connecting Rod Bushes - Ford and Mazda LF - STD - 4B4390-STD
ACL 4B4390-STD connecting rod bushes correspond to the manufacturer’s part number listed for Ford and Mazda (LF). Their function is to help guide rotating surfaces and maintain the oil film in the lower engine.
This part number is part of the ACL bearing lineup, but its current designation does not allow for the specific construction of the ACL Race Series versions to be determined without verification. It must be selected based on the dimensions of the crankshaft and the corresponding housings.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Manufacturer Part Number: 4B4390-STD
- Dimension: standard dimension (STD)
- Main engines: LF
- Automakers: Ford | Mazda
- Rod journal diameter (nominal dimension): 46.98 to 47 mm
- Connecting rod top end bore: 50.025 to 50.045 mm
- Maximum thickness at the top: 1.505 mm
- Maximum width: 16.25 mm
Engine models compatible with ACL 4B4390-STD bearings
The engine models listed for this set include: LF.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
-
Thickness in mm1,5
-
Width in mm16,25
-
Make (Engine)Ford
Mazda -
Rod Journal Diameter in mm46,98
47,00 -
Max. connecting rod bore in mm50,05
-
Min. connecting rod bore in mm50,03