One-piece brake rotors Girodisc 350x34 for Porsche 911 (996 and 997) Carrera S, 4S, and GTS (2002–2005) — 911 (997) Carrera (200

GIRODISC
Reference: GIRO-D1-032
Supplier Ref.: D1-032

Price: €1,129.90 Tax included
Available to order Within 10 days on average.
Unavailable in store (Montpellier)
Earn 1129 loyalty points (that is €60.00 in vouchers)

These Girodisc D1-032 alternative track brake rotors (350 × 34 mm) allow you to replace the brake rotors on the Porsche 911 (996 and 997) Carrera S, 4S, and GTS (2002–2005), Porsche 911 (997) Carrera with carbon-ceramic rotors (2004–2012), Porsche 911 (991.1) Carrera with carbon-ceramic rotors (2002+), Porsche 911 (991.2) Carrera S, 4S, and GTS (2002+), Porsche 911 (992.2) Carrera, C4, and T without carbon-ceramic brake rotors (2002+), Porsche 911 (992.1) Carrera S and 4S without carbon-ceramic brake rotors (2002+), Porsche 911 (996) Turbo (2003–2005), Porsche 911 (996) Turbo with carbon-ceramic rotors (2003–2005), Porsche 911 (997) Turbo without carbon-ceramic rotors (2006–2012), Porsche Cayman (987) S and R with carbon-ceramic rotors (2007–2013), Porsche Boxster (981) Spyder with carbon-ceramic brake rotors (2012–2016), Porsche Cayman (981) and Boxster S and GTS with carbon-ceramic brake rotors (2012–2016), Porsche 718 (982) Cayman and Boxster S and GTS with carbon-ceramic rotors (2016+), Porsche 718 (982) Cayman and Boxster GTS 4.0 (2016+), Porsche 718 (982) Cayman and Boxster GTS 4.0 with carbon-ceramic rotors (2016+), while retaining compatible brake calipers after inspection. These cast-iron tracks maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without brake calipers.

The curved internal cooling fins channel air through the rotor to dissipate heat during repeated braking. The floating mounting limits stresses caused by differences in thermal expansion between the rotor and the caliper housing and helps the rotor center itself between the brake pads, maintaining consistent contact when hot.

New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting, cast iron type, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.


Specifications for Girodisc D1-032 tracks for compatible vehicles

  • Brand: Girodisc
  • PartNumber: D1-032
  • Position: front
  • Sizes (diameter × thickness): 350 × 34 mm
  • Vehicles and models: Porsche 911 (996 and 997) Carrera S, 4S, and GTS (2002–2005); Porsche 911 (997) Carrera with carbon-ceramic rotors (2004–2012); Porsche 911 (991.1) Carrera with carbon-ceramic rotors (2002+); Porsche 911 (991.2) Carrera S, 4S, and GTS (2002+); Porsche 911 (992.2) Carrera, C4, and T without carbon-ceramic rotors (2002+); Porsche 911 (992.1) Carrera S and 4S without carbon-ceramic rotors (2002+); Porsche 911 (996) Turbo (2003–2005); Porsche 911 (996) Turbo with carbon-ceramic rotors (2003–2005); Porsche 911 (997) Turbo without carbon-ceramic rotors (2006–2012); Porsche Cayman (987) S and R with carbon-ceramic rotors (2007–2013); Porsche Boxster (981) Spyder with carbon-ceramic rotors (2012–2016); Porsche Cayman (981) and Boxster S and GTS with carbon-ceramic rotors (2012–2016); Porsche 718 (982) Cayman and Boxster S and GTS with carbon-ceramic rotors (2016–); Porsche 718 (982) Cayman and Boxster GTS 4.0 (2016–); Porsche 718 (982) Cayman and Boxster GTS 4.0 with carbon-ceramic rotors (2016+);
  • Braking surface: cast iron
  • Packaging: pair of brake pads, one left and one right; rotors not included.
  • Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with OEM rotors.
  • Mounting hardware: new parts supplied with the kit; replace the entire track-to-caliper mounting assembly during reassembly.
  • Part number for corresponding complete rotors: A1-032A.
  • Internal ventilation: directional curved fins
  • Minimum thickness: 32 mm
  • Original rotor diameter: 330 mm
  • Manufacturing of main components: United States

Vehicles compatible with Girodisc part number D1-032

Porsche 911 (996 and 997) Carrera S, 4S, and GTS (2002–2005)

Compatibility and mounting requirements:

Front/rear mounting in 350/350 mm with spacers and fasteners.

Porsche 911 (997) Carrera with carbon-ceramic rotors (2004–2012)

Compatibility and Mounting Requirements:

For factory PCCB braking systems; use the appropriate GT3/Turbo brake pad shapes.

Porsche 911 (991.1) Carrera with carbon-ceramic rotors (2002+)

Compatibility and Mounting Requirements:

For factory PCCB; use D1741-shaped front pads and 991 S rear pads.

Porsche 911 (991.2) Carrera S, 4S, and GTS (2002+)

Compatibility and mounting requirements:

350 mm rear mounting with spacers and fasteners.

Porsche 911 (992.2) Carrera, C4, and T without carbon-ceramic brake disks (2002+)

Compatibility and mounting requirements:

Without PCCB.

Porsche 911 (992.1) Carrera S and 4S without carbon-ceramic brake disks (2002+)

Compatibility and mounting requirements:

Without PCCB.

Porsche 911 (996) turbo (2003–2005)

Compatibility and mounting requirements:

Front/rear mounting in 350/350 mm with spacers and fasteners.

Porsche 911 (996) Turbo with carbon-ceramic rotors (2003–2005)

Compatibility and mounting requirements:

For vehicles equipped with factory-installed PCCB rotors.

Porsche 911 (997) Turbo without carbon-ceramic rotors (2006–2012)

Compatibility and mounting requirements:

Without PCCB.

Porsche Cayman (987) S and R with carbon-ceramic rotors (2007–2013)

Compatibility and mounting requirements:

For vehicles equipped with factory-installed PCCB rotors.

Porsche Boxster (981) Spyder with carbon-ceramic rotors (2012–2016)

Compatibility and mounting requirements:

For vehicles equipped with factory-installed PCCB rotors.

Porsche Cayman (981) and Boxster S and GTS with carbon-ceramic rotors (2012–2016)

Compatibility and mounting requirements:

For vehicles equipped with factory-installed PCCB rotors.

Porsche 718 (982) Cayman and Boxster S and GTS with carbon-ceramic brake rotors (2016+)

Compatibility and mounting requirements:

For vehicles equipped with factory-installed PCCB rotors.

Porsche 718 (982) Cayman and Boxster GTS 4.0 (2016+)

Compatibility and mounting requirements:

350 mm rear mounting; use 991 S brake pads to cover the entire track.

Porsche 718 (982) Cayman and Boxster GTS 4.0 with carbon-ceramic rotors (2016+)

Compatibility and Mounting Requirements:

For vehicles equipped with factory PCCB rotors.

Each application is subject to its specific brake system configuration, calipers, and any requirements for brake pads or spacers. Please verify these requirements before ordering.


Brake Pads and Brake System for Compatible Vehicles

For sports driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking demands. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.

For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.


Replacement brake pads for Girodisc rotors on compatible vehicles

When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the fasteners, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.


FAQ — Girodisc D1-032 for compatible vehicles

What are the sizes of the D1-032 brake pads for my vehicle? The part shown measures 350 × 34 mm and is mounted on the front axle. The height of the brake pad, the mounting hardware, and the brake discs must also be compatible with the mounting.

Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake shoes are not included.

Do I need to perform a pad change on my vehicle?Yes. Always install new brake pads with new rotors or new braking surfaces. Their shape and compound must be compatible with the D1-032 track and the calipers. Then break in the rotors and pads according to the prescribed procedures.

How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed in the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.

How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.


PDF Documents for Mounting and Break-in

We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.


Key Features of the Girodisc D1-032

  • 350 × 34 mm size for front braking on compatible vehicles.
  • Internal ventilation via curved fins to dissipate heat.
  • Alternative tracks to maintain a two-part mounting.
  • Left/right pair identified for mounting.
  • Compatible with existing aluminum brake rotors to preserve the benefits of the two-piece mounting on unsprung and rotating masses.

  • Diameter in mm
    350
  • Position
    Front
  • Thickness
    34

16 other products in the same category: