One-piece brake rotors Girodisc 380x32 - Ford Mustang GT500 (S197) (2013-2014)
These Girodisc D1-091 alternative front brake pads (380 × 32 mm) allow you to replace the braking surfaces on Ford Mustang GT500 (S197) (2013–2014) models while retaining the compatible brake rotors after inspection. These cast iron pads maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without rotors.
The cast iron track and floating assembly allow the disc to accommodate thermal expansion differences between its two halves and center itself between the brake pads. This construction also makes it easier to replace the tracks when they are worn.
New brake pads must be installed with new rotors or new tracks. Their shape and compound must match the mounting, the cast iron, and the intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D1-091 brake pads for compatible vehicles
- Brand: Girodisc
- PartNumber: D1-091
- Position: front
- Sizes (diameter × thickness): 380 × 32 mm
- Vehicles and models: Ford Mustang GT500 (S197) (2013–2014)
- Braking surface: cast iron
- Packaging: pair of rotors, one left and one right; discs not included.
- Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with OEM rotors.
- Mounting hardware: New parts supplied with the kit; replace the entire rotor-to-hub mounting assembly during reassembly.
- Part number for corresponding complete discs: A1-091.
- Minimum thickness: 29 mm
- Original rotor diameter: 380 mm
- Manufacturing location of main components: United States
Vehicles compatible with Girodisc part number D1-091
Ford Mustang GT500 (S197) (2013–2014)
Compatibility and mounting requirements:
For 5.8-liter engine only.
Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.
Brake pads and brake systems for compatible vehicles
For sports driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking demands. Unless otherwise specified for the Girodisc mounting, the shape of the brake pads remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement brake pads for Girodisc rotors on compatible vehicles
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. Aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the mountings, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc D1-091 for compatible vehicles
What are the sizes of the D1-091 pads for my vehicle? The part number shown measures 380 × 32 mm and is mounted on the front axle. The pad height, mounting hardware, and rotors must also be compatible with the mounting.
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake shoes are not included.
Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Their shape and compound must be compatible with the D1-091 track and/or rotor and the calipers. Then break in the rotors and pads according to the prescribed procedures.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed in the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of Girodisc D1-091 Alternative Tracks
- 380 × 32 mm size for front braking on compatible vehicles.
- Alternative tracks to maintain a two-piece mounting.
- Left/right pair identified for mounting.
- Compatible aluminum rotors are retained to maintain the benefits of the two-piece mounting on unsprung and rotating masses.
-
Diameter in mm380
-
PositionFront
-
Thickness32