One-piece brake rotors 410x36 for Porsche 911 (991.2) Carrera (2015+) with CCB - 911 (992) Carrera GTS (2019+) without CCB
These Girodisc D1-156 front replacement brake pads (410 × 36 mm) are designed to replace the brake pads on the Porsche 911 (991.2) Carrera with carbon-ceramic rotors (2015+), the Porsche 911 (992) Carrera GTS without carbon-ceramic rotors (2019+), Porsche 911 (992.1) Carrera S, 4S, and GTS with carbon-ceramic rotors (2015+), Porsche 911 (991) Turbo and Turbo S with carbon-ceramic rotors (2013–2019), Porsche 911 (992) Turbo without carbon-ceramic brake rotors (2019+), Porsche Cayman (981) GT4 with carbon-ceramic brake rotors (2015–2016), Porsche 718 (982) Cayman GT4, Boxster Spyder with carbon-ceramic rotors (2019–2023), while retaining compatible brake discs after inspection. These cast-iron tracks maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without brake discs.
The curved internal cooling fins channel air through the rotor to dissipate heat during repeated braking. The floating mounting limits stresses caused by thermal expansion differences between the rotor and the caliper housing and helps the rotor center itself between the brake pads, maintaining consistent contact even when hot.
New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting configuration, cast iron type, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D1-156 rotors for compatible vehicles
- Brand: Girodisc
- PartNumber: D1-156
- Position: front
- Sizes (diameter × thickness): 410 × 36 mm
- Vehicles and models: Porsche 911 (991.2) Carrera with carbon-ceramic rotors (2015+); Porsche 911 (992) Carrera GTS without carbon-ceramic rotors (2019+); Porsche 911 (992.1) Carrera S, 4S, and GTS with carbon-ceramic rotors (2015+); Porsche 911 (991) Turbo and Turbo S with carbon-ceramic rotors (2013–2019); Porsche 911 (992) turbo without carbon-ceramic rotors (2019+); Porsche Cayman (981) GT4 with carbon-ceramic rotors (2015–2016); Porsche 718 (982) Cayman GT4, Boxster Spyder with carbon-ceramic rotors (2019–2023)
- Braking surface: cast iron
- Packaging: pair of brake pads, one left and one right; rotors not included.
- Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with original equipment rotors.
- Mounting hardware: new parts supplied with the kit; replace the entire track-to-hub mounting assembly during reassembly.
- Part number for corresponding complete rotors: A1-156.
- Internal ventilation: directional curved fins
- Minimum thickness: 34 mm
- Original rotor diameter: 410 mm
- Manufacturing of main components: United States
Vehicles compatible with Girodisc part number D1-156
Porsche 911 (991.2) Carrera with carbon-ceramic rotors (2015+)
Compatibility and mounting requirements:
For original PCCB; at the front, use the brake pad shape designed for cast-iron rotors.
Use the GT3/turbo (991/992) pad shape designed for cast-iron rotors, with reduced sweep height.
Porsche 911 (992) Carrera GTS without carbon-ceramic rotors (2019+)
Compatibility and Mounting Requirements:
Without PCCB; use GT3 brake pads with a D1741 shape.
Porsche 911 (992.1) Carrera S, 4S, and GTS with carbon-ceramic rotors (2015+)
Compatibility and Mounting Requirements:
For factory PCCB; at the front, use the brake pad shape from the cast-iron rotor version.
Porsche 911 (991) Turbo and Turbo S with carbon-ceramic rotors (2013–2019)
Compatibility and mounting requirements:
For factory PCCB; at the front, use the pad shape designed for the cast-iron rotor version.
Porsche 911 (992) Turbo without carbon-ceramic rotors (2019+)
Compatibility and Mounting Requirements:
Without PCCB; use front brake pads with the D1741 shape from the GT3.
Porsche Cayman (981) GT4 with carbon-ceramic rotors (2015–2016)
Compatibility and mounting requirements:
For factory PCCB; at the front, use the brake pad shape from the cast-iron rotor version.
Porsche 718 (982) Cayman GT4, Boxster Spyder with carbon-ceramic rotors (2019–2023)
Compatibility and mounting requirements:
For OEM PCCB; at the front, use the pad shape specified for the cast-iron rotor version.
Each application is subject to its specific brake system configuration, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.
Brake Pads and Brake Systems for Compatible Vehicles
For sports or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking demands. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement brake pads for Girodisc rotors on compatible vehicles
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the mountings, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc D1-156 for compatible vehicles
What are the sizes of the D1-156 pads for my vehicle? The part shown measures 410 × 36 mm and is mounted on the front axle. The pad height, mounting hardware, and rotors must also be compatible with the mounting.
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake shoes are not included.
Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Use a compound suitable for cast iron and your intended use. Use the GT3/Turbo (991/992) brake pad shape intended for cast iron rotors, with a reduced sweep height.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and running in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of the Girodisc D1-156
- 410 × 36 mm size for front braking on compatible vehicles.
- Internal ventilation via curved fins to dissipate heat.
- Alternative tracks to maintain a two-part mounting.
- Left/right pair identified for mounting.
- Compatible with existing aluminum brake rotors to preserve the benefits of the two-piece mounting on unsprung and rotating masses.
-
Diameter in mm410
-
PositionFront
-
Thickness36