One-piece brake rotors 394x36 for McLaren 570S & GT (2015–2021) – 650S (2014–2017) – 675LT (2015–2017) – MP4-12C (2011–2014)

GIRODISC
Reference: GIRO-D1-159
Supplier Ref.: D1-159

Price: €1,348.20 Tax included
Available to order Within 10 days on average.
Unavailable in store (Montpellier)
Earn 1348 loyalty points (that is €65.00 in vouchers)

These Girodisc D1-159 front alternative brake pads (394 × 36 mm) allow you to replace the braking surfaces on the McLaren 570S & GT with carbon-ceramic rotors (2015–2021), the McLaren 650S (2014–2017), McLaren 675LT (2015–2017), and the McLaren MP4-12C with carbon-ceramic rotors (2011–2014), while retaining the compatible brake calipers after inspection. These cast-iron tracks maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without rotors.

The curved internal cooling fins channel air through the rotor to dissipate heat during repeated braking. The floating mounting limits stresses caused by thermal expansion differences between the rotor and the caliper housing and helps the rotor center itself between the brake pads, maintaining consistent contact when hot.

New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting configuration, cast material, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.


Specifications for Girodisc D1-159 rotors for McLaren 570S & GT

  • Brand: Girodisc
  • PartNumber: D1-159
  • Position: front
  • Sizes (diameter × thickness): 394 × 36 mm
  • Vehicles and models: McLaren 570S & GT with carbon-ceramic rotors (2015–2021); McLaren 650S (2014–2017); McLaren 675LT (2015–2017); McLaren MP4-12C with carbon-ceramic rotors (2011–2014)
  • Braking surface: cast iron
  • Packaging: pair of brake pads, one left and one right; rotors not included.
  • Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with original equipment rotors.
  • Mounting hardware: new parts supplied with the kit; replace the entire track-to-cup mounting assembly during reassembly.
  • Part number for corresponding complete rotors: A1-159.
  • Internal ventilation: directional curved fins
  • Minimum thickness: 34 mm
  • Original rotor diameter: 394 mm
  • Manufacturing of main components: United States

Vehicles compatible with Girodisc part number D1-159

McLaren 570S & GT with carbon-ceramic rotors (2015–2021)

Compatibility and mounting requirements:

For vehicles with factory-equipped carbon-ceramic brakes.

Brake pads with a maximum radial height of 66 mm are required for this track.

McLaren 650S (2014–2017)

Compatibility and Mounting Requirements:

Brake pads with a maximum radial sweep height of 66 mm are required for this track.

McLaren 675LT (2015–2017)

Compatibility and mounting requirements:

Brake pads with a maximum radial sweep height of 66 mm are required for this track.

McLaren MP4-12C with carbon-ceramic rotors (2011–2014)

Compatibility and mounting requirements:

For vehicles with factory-equipped carbon-ceramic brakes.

Each application is subject to its specific brake system configuration, calipers, and any requirements for brake pads or spacers. Please verify these requirements before ordering.


Brake Pads and Brake System for Your McLaren 570S & GT

For sports driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed to withstand high braking stresses. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.

For intensive use, we recommend compatible aviation-grade flexible hoses and high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation ensures compatibility with the original hydraulic system.


Replacement Brake Pads for McLaren 570S & GT Girodisc Rotors

When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the mountings, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.


FAQ — Girodisc D1-159 for McLaren 570S & GT

What are the sizes of the D1-159 tracks for my McLaren 570S & GT? The part shown measures 394 × 36 mm and is mounted on the front axle. The track height, mounting hardware, and hubs must also be compatible with the mounting.

Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake calipers are not included.

Do I need to replace the brake pads on my McLaren 570S & GT?Yes. Always install new brake pads with new rotors or new brake pads. Use a compound suitable for cast iron and your intended use. Brake pads with a maximum radial height of 66 mm are required for the braking surface.

How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.

How do I break in this mounting on my McLaren 570S & GT? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build an even transfer ply. The PDF documents below detail mounting and break-in.


PDF Documents for Mounting and Break-in

We’ve included two PDF documents below: one guide for installing and breaking in the rotors, and one guide for installing new pads on existing rotors. Review the document that applies to your specific task before you begin.


Key Features of Girodisc D1-159 Alternative Track Brake Pads

  • 394 × 36 mm size for the front brakes of your McLaren 570S & GT.
  • Internal ventilation via curved fins to dissipate heat.
  • Alternative tracks to maintain a two-piece mounting.
  • Left/right pair identified for mounting.
  • Compatible aluminum rotors are retained to preserve the benefits of the two-piece mounting on unsprung and rotating masses.

  • Diameter in mm
    394
  • Position
    Front
  • Thickness
    36

16 other products in the same category: