One-piece brake rotors for the rear brake - Lamborghini Gallardo Super Trofeo (2011–2013)

GIRODISC
Reference: GIRO-D2-168
Supplier Ref.: D2-168

Price: €1,219.80 Tax included
Available to order Within 10 days on average.
Unavailable in store (Montpellier)
Earn 1219 loyalty points (that is €65.00 in vouchers)

Girodisc D2-168 rear alternative tracks for Lamborghini Gallardo Super Trofeo (2011–2013) models allow you to replace the braking surfaces while retaining the compatible brake calipers after inspection. These cast-iron rotors maintain the mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without calipers.

The curved internal cooling fins channel air through the disc to dissipate heat during repeated braking. The floating mounting reduces stress caused by thermal expansion differences between the rotor and the caliper housing and helps center the rotor between the brake pads, ensuring consistent contact even when hot.

New brake pads must be installed with new discs or rotors. Their shape and compound must match the mounting configuration, cast material, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.


Specifications for Girodisc D2-168 rotors for compatible vehicles

  • Brand: Girodisc
  • PartNumber: D2-168
  • Position: rear
  • Vehicles and models: Lamborghini Gallardo Super Trofeo (2011–2013)
  • Braking surface: cast iron
  • Packaging: pair of brake pads, one left and one right; rotors not included.
  • Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with original equipment rotors.
  • Mounting hardware: Sport mounting kit included; replace the entire track-to-caliper mounting assembly during reassembly.
  • Part number for corresponding complete rotors: A2-168.
  • Internal ventilation: directional curved fins
  • Diameter: 380 mm
  • Manufacturing of main components: United States

Vehicles compatible with Girodisc part number D2-168

Lamborghini Gallardo Super Trofeo (2011–2013)

Compatibility and mounting requirements:

The existing mounting must retain the appropriate caliper spacers.

Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.


Brake pads and braking systems for compatible vehicles

For sports driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking demands. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.

For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.


Replacement brake pads for Girodisc rotors on compatible vehicles

When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the mounting components, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.


FAQ — Girodisc D2-168 for compatible vehicles

Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The discs are not included.

Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Use a compound suitable for cast iron and your intended use. The existing mounting must retain the appropriate caliper spacers.

How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.

How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.


PDF Documents for Mounting and Break-in

We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.


Key Features of Girodisc D2-168 Alternative Tracks

  • Internal ventilation via curved fins to dissipate heat.
  • Alternative tracks to maintain a two-part mounting.
  • Left/right pair identified for mounting.
  • Compatible aluminum bowls are retained to maintain the benefits of the two-part mounting regarding unsprung and rotating masses.

  • Diameter in mm
    380
  • Position
    Rear
  • Thickness
    NC

16 other products in the same category: