One-piece brake rotors for the front, 355x32, for Audi A4 (B6 and B7) (2000–2009) – S4 (B5, B6, and B7) (1997–2009) – for mounti

GIRODISC
Reference: GIRO-D1-053
Supplier Ref.: D1-053

Price: €937.30 Tax included
Available to order Within 10 days on average.
Unavailable in store (Montpellier)
Earn 937 loyalty points (that is €40.00 in vouchers)

These Girodisc D1-053 alternative front brake rotors (355 × 32 mm) allow you to replace the braking surfaces on Audi A4 (B6 and B7) models with Alcon or StopTech mounting (2000–2009), Audi S4 (B5, B6, and B7) models with Alcon or StopTech mounting (1997–2009), Audi A6 (C5) and allroad models with Alcon or StopTech brake mountings (1997–2004), while retaining compatible rotors after inspection. These cast-iron pads maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without rotors.

The curved internal cooling fins channel air through the disc to dissipate heat during repeated braking. The floating mounting reduces stress caused by thermal expansion differences between the rotor and the caliper housing and helps the rotor center itself between the brake pads, maintaining consistent contact even when hot.

New brake pads must be installed with new discs or rotors. Their shape and compound must match the mounting configuration, cast iron type, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.


Specifications for Girodisc D1-053 rotors for compatible vehicles

  • Brand: Girodisc
  • PartNumber: D1-053
  • Position: front
  • Sizes (diameter × thickness): 355 × 32 mm
  • Vehicles and models: Audi A4 (B6 and B7) with Alcon or StopTech mounting (2000–2009); Audi S4 (B5, B6, and B7) with Alcon or StopTech mounting (1997–2009); Audi A6 (C5) and allroad with Alcon or StopTech mounting (1997–2004)
  • Braking surface: cast iron
  • Packaging: pair of brake pads, one left and one right; rotors not included.
  • Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with OEM rotors.
  • Part number for corresponding complete rotors: A1-053.
  • Internal ventilation: directional curved fins
  • Minimum thickness: 30 mm
  • Mounting: Sport mounting kit included.
  • Manufacturing of main components: United States

Vehicles compatible with Girodisc part number D1-053

Audi A4 (B6 and B7) with Alcon or StopTech mounting (2000–2009)

Compatibility and mounting requirements:

For Alcon/StopTech mounting with 355 × 32 mm rotors.

Note: Alcon/StopTech applications must be confirmed. Only S4 B5 and A6/Allroad C5 2.7 biturbo (except V8 4.2)

Audi S4 (B5, B6, and B7) with Alcon or StopTech mounting (1997–2009)

Compatibility and Mounting Requirements:

For Alcon/StopTech 355 × 32 mm mounting kits.

Audi A6 (C5) and allroad with Alcon or StopTech mounting (1997–2004)

Compatibility and mounting requirements:

For Alcon/StopTech 355 × 32 mm mounting.

Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Please verify these requirements before ordering.


Girodisc D1-053 Mounting Requirements

  • Audi A4 (B6 and B7) with Alcon or StopTech mounting (2000–2009): For Alcon/StopTech mounting in 355 × 32 mm.
  • Audi A4 (B6 and B7) with Alcon or StopTech mounting (2000–2009): Caution: Alcon/StopTech applications must be confirmed. Only S4 B5 and A6/Allroad C5 2.7 biturbo (except 4.2 V8)
  • Audi S4 (B5, B6, and B7) with Alcon or StopTech mounting (1997–2009): For Alcon/StopTech mounting in 355 × 32 mm.
  • Audi S4 (B5, B6, and B7) with Alcon or StopTech mounting (1997–2009): Note: Alcon/StopTech mounting must be confirmed. Only S4 B5 and A6/Allroad C5 2.7 biturbo (except 4.2 V8)
  • Audi A6 (C5) and allroad with Alcon or StopTech brakes (1997–2004): For Alcon/StopTech mounting in 355 × 32 mm.
  • Audi A6 (C5) and allroad with Alcon or StopTech mounting (1997–2004): Note: Alcon/StopTech mounting must be confirmed. Only S4 B5 and A6/Allroad C5 2.7 biturbo (except 4.2 V8)

Brake pads and brake systems for compatible vehicles

For sports driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking demands. Unless otherwise specified for the Girodisc kit, the brake pad shape remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.

For intensive use, we recommend compatible aviation-grade flexible hoses and high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.


Replacement brake pads for Girodisc rotors on compatible vehicles

When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the mountings, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.


FAQ — Girodisc D1-053 for compatible vehicles

What are the sizes of the D1-053 pads for my vehicle? The part shown measures 355 × 32 mm and is mounted on the front axle. The pad height, mounting hardware, and rotors must also be compatible with the mounting.

Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake shoes are not included.

Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Use a compound suitable for cast iron and your intended use. Note: Alcon/StopTech applications must be confirmed. Only S4 B5 and A6/Allroad C5 2.7 biturbo (except V8 4.2)

How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.

How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.


PDF Documents for Mounting and Break-in

We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.


Key Features of the Girodisc D1-053

  • 355 × 32 mm size for front braking on compatible vehicles.
  • Internal ventilation via curved fins to dissipate heat.
  • Replaceable alternative tracks to maintain a two-part mounting.
  • Left/right pair identified for mounting.
  • Compatible aluminum rotors can be retained to maintain the benefits of the two-piece mounting on unsprung and rotating masses.

  • Diameter in mm
    355
  • Position
    Front
  • Thickness
    32

16 other products in the same category: