One-piece brake rotors for the rear brake on McLaren 540C & 570 GT (2016–2021) – MP4-12C (2011–2014) without CCB
The Girodisc D2-023 rear alternative track brake pads (350 × 32 mm) allow you to replace the braking surfaces on McLaren 540C & 570 GT models without carbon-ceramic rotors (2016–2021), McLaren MP4-12C models without carbon-ceramic brake disks (2011–2014), while retaining the compatible brake calipers after inspection. These cast-iron brake disks maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without calipers.
The curved internal cooling fins channel air through the rotor to dissipate heat during repeated braking. The floating mounting minimizes stresses caused by thermal expansion differences between the rotor and the caliper housing and helps the rotor center itself between the brake pads, maintaining consistent contact when hot.
New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting, cast material, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D2-023 rotors for McLaren 540C & 570 GT
- Brand: Girodisc
- PartNumber: D2-023
- Position: rear
- Sizes (diameter × thickness): 350 × 32 mm
- Vehicles and models: McLaren 540C & 570 GT without carbon-ceramic rotors (2016–2021); McLaren MP4-12C without carbon-ceramic rotors (2011–2014)
- Braking surface material: cast iron
- Packaging: pair of brake pads, one left and one right; rotors not included.
- Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with original equipment rotors.
- Mounting hardware: new parts supplied with the kit; replace the entire track-to-cup mounting assembly during reassembly.
- Part number for corresponding complete rotors: A2-023.
- Internal ventilation: directional curved fins
- Manufacturing of main components: United States
Vehicles compatible with Girodisc part number D2-023
McLaren 540C & 570 GT without carbon-ceramic brake disks (2016–2021)
Compatibility and mounting requirements:
Excludes carbon-ceramic brakes; front mounting of 380 mm with spacers and D1598-shaped rear pads.
McLaren MP4-12C without carbon-ceramic rotors (2011–2014)
Compatibility and Mounting Requirements:
Excludes carbon-ceramic; 380 mm front mounting with spacers and D1598-shaped rear brake pads.
Each application is subject to its specific brake system, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.
Brake Pads and Brake System for Your McLaren 540C & 570 GT
For sports driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking demands. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing you to retain the vehicle’s brake calipers. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement Brake Pads for McLaren 540C & 570 GT Girodisc Rotors
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the mounting components, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc D2-023 for McLaren 540C & 570 GT
What are the sizes of the D2-023 tracks for my McLaren 540C & 570 GT? The part shown measures 350 × 32 mm and is mounted on the rear axle. The track height, mounting hardware, and bowls must also be compatible with the mounting.
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake calipers are not included.
Do I need to replace the brake pads on my McLaren 540C & 570 GT?Yes. Always install new brake pads with new rotors or new braking surfaces. Their shape and compound must be compatible with the D2-023 track and/or rotor and the calipers. Then break in the rotors and pads according to the prescribed procedures.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed in the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my McLaren 540C & 570 GT? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: instructions for installing and breaking in the discs, and instructions for installing new tracks on existing rotors. Consult the document that applies to your specific task before you begin.
Key Features of Girodisc D2-023 Alternative Track Brake Pads
- 350 × 32 mm size for the rear brakes on your McLaren 540C & 570 GT.
- Internal ventilation via curved fins to dissipate heat.
- Replaceable tracks to maintain a two-piece mounting.
- Left/right pair identified for mounting.
- Compatible aluminum brake rotors are retained to maintain the benefits of the two-piece mounting on unsprung and rotating masses.
-
Diameter in mm350
-
PositionRear
-
Thickness32