The GT2i Race 6-point harness uses 100% polyester straps and can withstand forces of 3800 Newton.
The steel adjusters incorporate a spring to optimize tightening.
The yellow tabs allow you to loosen the straps quickly to untie yourself at the finish line.
This sedan harness also has a Velcro® strap for attaching a radio cable or water dropper.
The C40 steel aviation buckle meets the specifications and precise tolerances of the FIA standard. It receives C60 carbon steel fasteners.
Its central buckle has been redesigned to facilitate the locking and unlocking of the harness while reinforcing the mechanism to increase safety and at the same time prevent the entry of impurities inside the system.
PLEASE NOTE: Valid until December 31, 2031 for the .31 version!
Features :
Shoulder straps: 2"/3" HANS® specific
Abdominal straps: 3".
Aviation buckle on 6th point.
Made in Europe.
Delivered without eyelets
Certification FIA 8853-2016
MANUFACTURER: MCF S.R.L.
MODEL: 50100514
HOM. NO: SH.092.22-T-6
FIA STANDARD: 8853-2016
The GT2i Race 6-point harness uses 100% polyester straps and can withstand forces of 3800 Newton.
The steel adjusters incorporate a spring to optimize tightening.
The yellow tabs allow you to loosen the straps quickly to untie yourself at the finish line.
This sedan harness also has a Velcro® strap for attaching a radio cable or water dropper.
The C40 steel aviation buckle meets the specifications and precise tolerances of the FIA standard. It receives C60 carbon steel fasteners.
Its central buckle has been redesigned to facilitate the locking and unlocking of the harness while reinforcing the mechanism to increase safety and at the same time prevent the entry of impurities inside the system.
PLEASE NOTE: Valid until December 31, 2031 for the .31 version!
Features :
Shoulder straps: 2"/3" HANS® specific
Abdominal straps: 3".
Aviation buckle on 6th point.
Made in Europe.
Delivered without eyelets
Certification FIA 8853-2016
MANUFACTURER: MCF S.R.L.
MODEL: 50100514
HOM. NO: SH.092.22-T-6
FIA STANDARD: 8853-2016
This pack includes two GT2i Race 6-point harnesses intended for use in sedans, designed to equip a cockpit for competition or track days when regulations require FIA 8853-2016 approval. The set is suitable for the needs of a crew (driver and co-driver) or for a setup requiring two identical installations.
Each 6-point harness provides optimized support for the pelvis and torso to limit the driver’s movement during heavy deceleration, when cornering, and during rapid changes in direction.
The shoulder straps come in a combination width of 2"/3", balancing comfort with even force distribution across contact points, depending on the seat configuration and harness routing.
The steel adjusters ensure mechanical durability suited to the demands of intensive use, with a pull-up style tightening mechanism for direct and precise tension adjustment.
