Petrol and Diesel Engine Oil - Euro 4, 5, and 6 5W30

100% Synthetic

A high-performance, 100% synthetic lubricant that offers both high protection and fuel economy. Approved by BMW, GM-Opel, and Mercedes-Benz, among others, for its Extra Fuel Economy properties.

Specially formulated for the latest-generation cars equipped with gasoline or diesel engines—whether atmospheric or turbocharged, with indirect or direct injection—that meet Euro 4, 5, or 6 emissions standards and require an oil

• that meets the ACEA C3 specification—that is, high HTHS viscosity (>3.5 mPa·s) and “Mid SAPS,” with reduced levels of sulfate ash (≤0.8%), phosphorus (0.07 ≤ x ≤ 0.09%), and sulfur (≤0.3%),

   

• or ACEA C2, i.e., low-friction, low HTHS (≥2.9 mPa·s), and “Mid SAPS.” Suitable when a “Fuel Economy” lubricant is required: ACEA C2 standards.

   

Compatible with catalytic converters (CAT) and particle filters (FAP) or diesel particulate filters (DPF).

Some engines cannot use this type of engine oil; always check and consult the vehicle’s maintenance manual before use.

STANDARDS: ACEA C2/C3

API: SERVICE SN

• APPROVALS: BMW LL-04
• GENERAL MOTORS GM dexos2™ (replaces GM-LL-A-025 & B-025) under No. D20247HE011
• MERCEDES-BENZ MB-Approval 229.52
• OPEL OV 040 1547 - D30
• VAUXHALL OV 040 1547 - D30
• VW 505 00 505 01

PERFORMANCE: FIAT 9.55535-S1, FIAT 9.55535-S3

RECOMMENDATIONS: HONDA , HYUNDAI, KIA, MITSUBISHI, NISSAN, SSANGYONG, SUBARU, SUZUKI, TOYOTA

5-liter container

MOTUL All in 1 Petrol is a complete multi-action petrol engine cleaner for use in all types of petrol engines, injection or carburettor, turbo or naturally aspirated, with or without catalytic converter or particle filter, using all types of petrol, leaded or unleaded, Ethanol, LPG and biofuels.

Gasoline additive compatible with E10 (Ethanol 10%).

It effectively cleans the deposits and fouling inherent in the operation of the engine's injectors and fuel supply systems thanks to its multi-action curative properties, thus limiting :
- Fouling of injectors and fuel system
- Condensation in the entire fuel system
- Gumming and varnishing in the injectors or carburettor
- Fouling of combustion chambers and intake valves

MOTUL All in 1 Petrol ensures perfect lubrication during the cleaning phase and prevents the deposit of loose micro-particles.
By removing deposits and fouling from valves, injectors and combustion chambers, it enables powerful combustion, restoring engine performance, reducing fuel consumption and lowering emissions of gases and particles.

The multi-action additive also protects the fuel system against corrosion, making it ideal for fuels with Ethanol (E5 & E10).

Directions for use :

Pour the entire bottle directly into the petrol tank before refuelling. Drive normally until all the fuel is used up, then the fuel system will be completely cleaned from the tank to the injector and combustion chamber.

One dose is sufficient for tanks up to 80 litres.

Do not exceed the prescribed dose. If necessary, use 2 successive treatments instead.

To maintain the benefits of the cleaning, use MOTUL All in 1 Petrol regularly afterwards.