Stainless Steel Fuel Hose Dash 06 (Per Linear Meter)

DASH 6 nitrile hose (per m)

The N type hose has many advantages. Indeed, because of a double stainless steel protection, it resists better to pressure, vaccum and external shocks. 

The internal nitrile composition allows the use of all types of fuels: gasoline, diesel, ethanol, nitromethane, oil, refrigerants...

Note: The use of ethanol-blended gasoline (E5, E10, E85) causes premature wear of CPE-based hoses. It is recommended that they be replaced every 2 to 3 years and inspected regularly. For extended durability, we recommend the Goodridge 600 series Teflon hose G-600-6 with its specific fittings.

Technical datas:

Operating temperature : -49°C to +150°C

Inside diameter : 8.73 mm

Outside diameter : 13.89 mm

Working pressure (bar) : 69

Minimum burst pressure (bar) : 420

Radius of curvature (mm) : 63.5

Weight (kg/m) : about 0.201

Hose tested in the laboratory in accordance with ISO 1817 and SAE J30

• Compatible with SP98 and SP95-E5
• Proven resistance to pressure and temperature stresses
• Dimensional variation of less than 2%
• Excellent stability after aging in fuel
• Mechanical properties retained after testing
• Tests passed successfully

Less detail

This GOODRIDGE carburetor banjo, T Male/Female, is designed for WEBER carburetors.

Dash hose: 200-06

Thread: 9/16x18

Less detail

This Goodridge 90° JIC Concave Swivel is part of the most complete line of lightweight, reusable alloy hose fittings that are specifically designed to fit 200 and 210 series hose. 
Its aerospace-grade, triple-seal, double O-ring nitrile design ensures a secure, leak-free connection every time.
All 236 and 336 series nipples are available in bright red and blue anodized and provide permanent alignment with 360 degree swivel ends. 

Applications: fuel, oil, coolants, methanol, water.

Thread: 6/16x18

Hose: Dash 06

Material: aluminum

Less detail

Goodridge 90° Female Banjo 9/16x18 for Weber Carburator

Less detail

Goodridge banjo bolt for Weber carburettor.

Thread: M12x150

Use W-BSVJ gasket

Less detail

Goodridge Aluminium Seal 16.3mm-19.8mm thickness 1.4mm

Less detail

DASH 6 nitrile hose (per m)

The N type hose has many advantages. Indeed, because of a double stainless steel protection, it resists better to pressure, vaccum and external shocks. 

The internal nitrile composition allows the use of all types of fuels: gasoline, diesel, ethanol, nitromethane, oil, refrigerants...

Note: The use of ethanol-blended gasoline (E5, E10, E85) causes premature wear of CPE-based hoses. It is recommended that they be replaced every 2 to 3 years and inspected regularly. For extended durability, we recommend the Goodridge 600 series Teflon hose G-600-6 with its specific fittings.

Technical datas:

Operating temperature : -49°C to +150°C

Inside diameter : 8.73 mm

Outside diameter : 13.89 mm

Working pressure (bar) : 69

Minimum burst pressure (bar) : 420

Radius of curvature (mm) : 63.5

Weight (kg/m) : about 0.201

Hose tested in the laboratory in accordance with ISO 1817 and SAE J30

• Compatible with SP98 and SP95-E5
• Proven resistance to pressure and temperature stresses
• Dimensional variation of less than 2%
• Excellent stability after aging in fuel
• Mechanical properties retained after testing
• Tests passed successfully

Less detail

This GOODRIDGE Carburetor, female/female T-shaped banjo is intended for WEBER

Dash Hose: 200-06

Less detail

Goodridge 90° Female Banjo 9/16x18 for Weber Carburator

Less detail

Goodridge banjo bolt for Weber carburettor.

Thread: M12x150

Use W-BSVJ gasket

Less detail

Goodridge Aluminium Seal 16.3mm-19.8mm thickness 1.4mm

Less detail