Inoxcar 65 mm DPF Removal Pipe for - BMW 1 Series F40 116i and 118i B38 (2019-2024)

The Inoxcar OPF/GPF removal pipe for the BMW 1 Series F40 116i and 118i 1.5 turbo B38 (2019–2024) replaces the original gasoline particle filter. This 65 mm stainless steel section is intended for closed-circuit tuning.

Installation requires cutting the stock exhaust line and reprogramming the engine control unit. The connection depends on the rear muffler being retained or installed.

Specifications for the Inoxcar TOPF.BMF40.01 pipe

• Brand: Inoxcar.
• Manufacturer Part Number: TOPF.BMF40.01.
• Type: OPF/GPF filter replacement pipe.
• Material: stainless steel.
• Pipe diameter: 65 mm.
• Outlet connection: 65 mm outside diameter.
• Engine codes: B38A15A and B38A15F.
• Cutting the original line: required.
• Engine remapping: required.
• CE approval: No.

Compatible BMW 1 Series F40 models

• BMW 116i F40 1.5 turbo 109 ch: models from the 2019 range through June 2024, with OPF.
• BMW 118i F40 1.5 turbo 136 or 140 ch: models from the 2019 range through June 2024, with OPF.
• B38A15A: Euro 6D-TEMP-EVAP-ISC or Euro 6D-ISC-FCM.
• B38A15F: Euro 6D-ISC-FCM or Euro 6E.

Adapters must be ordered separately

• With original rear muffler: Inoxcar AD.BMF40.04 adapter.
• With Inoxcar rear muffler: Inoxcar AD.BMF40.05 adapter.

Check the engine code and exhaust system configuration before ordering. This part removes the gasoline particle filter and is not approved for road use.