BRATEX clutches are designed for use in leisure sports (trackday) or competition vehicles from series such as Group N. BRATEX clutch elements can be fitted in place of your original equipment, without modifying the flywheel. They provide greater reliability and resistance to intense stress, with up to 15% more torque on average. Their technical features and affordable prices make them excellent products for rally and circuit racing.
4-pad sintered metal clutch disc, cushioned 6 springs (28 splines)
| MAKE | MODEL | Ø | HUB | TYPE |
|---|---|---|---|---|
| VOLKSWAGEN | GOLF II 1,8 Gti 16V | 210mm | 22,1X20,3XEV | M6A - 4CX |
| GOLF III 2.0 | 210mm | 22,1X20,3XEV | M6A - 4CX |
BRATEX Clutch components are designed for a strong leisure use as track days, or for stock vehicles racing categories such as Group N. BRATEX clutches components fit OE clutches without any modifications. These components improve the reliability and provide better performances in intense use, handle up to 15% torque increase. Their technical specifications and their affordable budgets made them excellent products for rally or track use.
BRATEX reinforced cover clutch for Volkswagen Golf 1 / 2 / 3
Clutch Kit (Mechanism + Clutch Disc) for Volkswagen Golf 2 2.0 GTi 16s
Reference:
pack-emb-golf-2-gti-16s
This complete clutch kit is designed to replace or upgrade the clutch on the Volkswagen Golf 2 2.0 GTi 16s. It includes a clutch disc featuring 4-pad sintered metal technology with springing, paired with a reinforced clutch cover, to ensure more efficient torque transmission and better performance under demanding conditions. The BRATEX clutch disc included is a 4-pad sintered metal model, designed to provide more responsive engagement than an organic disc, with increased resistance to thermal and mechanical stress. It features a 6-spring damped hub, designed to reduce jerks and improve vibration damping in the drivetrain—a particularly important consideration for a reinforced mounting. The reinforced BRATEX clutch cover included in the kit is designed for the Volkswagen Golf 1, Golf 2, and Golf 3. Its reinforced design is intended to increase holding capacity and tightening stability, in order to better withstand high loads and reduce the risk of slippage when the transmitted torque increases. Vehicle compatibility: Volkswagen Golf 2 2.0 GTi 16s. Other compatibilities listed for the components: Volkswagen Golf 2/3 for the disc and Volkswagen Golf 1/2/3 for the mechanism. Sizes, maximum torque, control type, and mounting recommendations: Not specified.
