GT2i Race & Safety rotatory hand pump for Fuel/Ethanol/Oil Barrel 1T/1L Dismantled
Reference M-POMPE-FUT-3
This GT2i Race & Safety rotary hand pump for barrel can be dismantled. It allows a fast effortlessly liquid transfer with a low viscosity, such as petrol/ethanol (E85) and oil (maximum viscosity SAE 30). The pump has a dual rotor system which offers an important and constant flow for a reduced effort.
One round equals to a liter.
Pump body in aluminium.
To save space, this rotary pump for barrel can be totally dismantled to ease storage and transportation.
Supplied without oil, the pump mechanism must be lubricated with a SAE 10 oil.
Temperature: -10°C and +55°C
Elbow thread: 32x150
Elbow outlet outer diameter: 32mm
Elbow outlet inner diameter: 29mm
This transparent green refuelling hose fits on the M-POMPE-FUT-3 rotary barrel pumps as well as on the G-SPT12-1658-ECO-2 fuel couplers.
Sold by the meter.
Technical specifications:
Inside diameter: 30mm
Outside diameter: 39mm
Length: 1 linear meter
If you want to measure the amount of gasoline or kerosene in your vehicle, the PIUSI K24 is the right tool for you.
It is the volumeter for private use that meets the PIUSI K24 requirements, i.e., the use of materials in explosive atmospheres.
With its aluminum body and sealed electronic board, it can be used in all working conditions. The K24 volumetric meter is easy to install, either in line or at the end of the discharge pipe.
It has a multi-position display, which makes it easy to read.
Main features:
- Pulse signal type: single channel, reed switch
- Electronic circuit with LCD display: partial indication 5 digits from 0.1 to 99999, total 6 digits from 1 to 999999.
- Resettable total
- Flow indication
- Repeatability 0.3%.
- Pressure loss < 0,03 bar at 120 l/min
- Calibratable
Note: Remember to calibrate your meter before first use for greater accuracy.
This female fuel coupler is made of light and resistant aluminum.
Mandatory in certain disciplines, this hydraulic coupling is the perfect accessory for filling or taking off fuel for Group R and FIA vehicles.
Use: gasoline
Flow diameter: 12mm
Hose diameter: 32mm
90° BSP 1x11 female - female adapter for manual pump.
This complete refueling kit is designed to provide a solution for transferring and dispensing fuel from a drum, suitable for competition, workshop, or pit crew environments, where speed, flow control, and reliable connections are top priorities. The kit includes a removable manual rotary pump compatible with gasoline, ethanol, and oil; a large-diameter transparent refueling hose; a flow meter specifically designed for drum pumps; and a set of fittings, adapters, and quick connectors to assemble a complete refueling system. The manual rotary pump is the main transfer component. Its manual operation allows for autonomous use without an electrical power supply, while ensuring consistent pumping for filling or transferring. The transparent green refueling hose (30x39 mm) facilitates visual monitoring of the fluid and integrates into a high-flow refueling line to minimize pressure drops and improve flow stability depending on the installation configuration. The flow meter for the drum pump tracks the volumes dispensed during refueling operations, which is useful for traceability, consumption management, or ensuring repeatable fill levels under operating conditions. The connection components include a 1x11 male BSP union fitting with a 32 mm aluminum outlet and a Viton gasket, a 1x11 male BSP to 1-1/4x16 male UN manual pump adapter made of aluminum, a Dash 12 Eco female fuel coupler, and a 90° BSP 1x11 female-to-female adapter. This assembly is designed to ensure a secure connection, facilitate the routing of the line (particularly thanks to the 90° elbow), and allow for quick connection and disconnection on the refueling side via the coupler, while maintaining compatibility with common fuel refueling connection standards. Sizes, lengths, meter measurement range, maximum flow rate, and detailed compatibility information: Not specified.
